Cricut Design Space

How to Cut a Rhinestone design with Cricut

Posted on by Briggitte Rivas
How to cut maker a rhinestone template design with cricut design space, cricut explorer, cricut air. cricut maker
Cut Rhinestone with cricut machines

Rhinestones template for cricut

Create your own rhinestone designs with this tutorial or purchase rhinestone designs from bgartdesigner Store that you can add to any fabric surface you want. Follow these simple steps to see what you need to do.

Supplies Needed:

How to Cut a Rhinestone Template with Cricut Design Space:

1. Create or open your rhinestone design in Cricut design space. DO NOT resize the design. Each tiny circle will fit an individual rhinestone.

2. Once you’ve finalized your design, place the template material onto your cutting mat, and load the cutting mat into your Cricut machine. In the Send panel, ADD a New Material and call it “Rhinestone Template Material.” Cut pressure 210 multicut 2x blade type regular. Click Send to cut out your design.

Cricut maker with rhinestone stencil flock

3. Peel the rhinestone Stencil Flock off of the material base. It works best to do it quickly.

4. Add the rhinestone Stencil Flock material, which is your template, to a large foam sheet.

5. Pour your rhinestones onto your design.

6. Gently brush the rhinestones into the template holes. Use the Pick-Me-Up™ tool to place individual rhinestones.

7. Once you have all of your rhinestones positioned face-up on your template, cover the design with a piece of transfer tape. Press firmly to adhere all of the rhinestones.

8. Pre-heat your easypress to 335 ℉ and set the time to 30 seconds, pass the easy press over your t-shirt

9. Lift your rhinestones attached to the transfer tape and position them on your t-shirt (be sure to place a piece of cardboard inside the shirt, to avoid sticking the back of the shirt with the front).

10. Place the easy press on the design and apply pressure for 30 seconds to 335 ℉. Remove the cloth and carefully peel back the transfer tape. Remove carefully peel back the transfer tape.

11. Turn the shirt over and iron again 30 seconds in the back of the stones.

Briggitte Rivas

6 thoughts on “How to Cut a Rhinestone design with Cricut”

    • Briggitte Rivas says:

      hello, thank you for your comment! each material has a link from a site recommended for purchase, in addition to this option there are other websites where you can buy them, such as therhinestoneworld, amazon, silhouetteamerica and many more.

  3. Fee says:

    The settings you gave to cut on a cricut in design space is actually for the silhouette. DS does not have blade settings or a rhinestone material selection. Can you fix this as I am trying to cut in DS and cannot.

Leave a Reply